DESIGN SERVICE FOR YOUR GREYWATER RECYCLING SYSTEM.
As part of the GRS package we produce a 1-200 scale greywater drainage plan of your
site based on information you provide.
If you decide the GRS is the appropriate system for your site and you wish to
proceed with the design phase a 25% deposit is required with the relevent information
to produce the GRS design for your specific site.
The required information is as follows -
- Name of owner
- Address of site
- Contours, slope & watercourses
- Property boundaries, length and direction
- All existing buildings and distance to boundary
- Existing drainage or floor plan showing all greywater sources, bath, shower, basins, tubs, sinks, spas
- Vehicular tracks
- Location and approximate size of existing trees, shrubs & groundcovers
- Locations of soil sampling sites
- Locations of where you want to irrigate, downhill from your house site
The 1-200 scale plan is suitable, and usually required, for submission to your local council
and for installation purposes, showing the details provided plus the proposed layout of the GRS.
- Greywater outlet locations
- Proposed irrigation beds
- Distribution pipes
- Aerobic grease filter
- Stormwater diversion mounds & trenches
- Sewer pipe layout and inspection openings
- Total trench lengths
Most local councils require an accredited soil or wastewater engineer to assess and
sign off on the wastewater treatment systems (greywater and blackwater) installed
on your site. If this is required by your local council check the yellow pages for a suitable local provider.
|
